As a beginner, you may encounter some common technical issues while using an airbrush. Don't worry, this is part of the learning process. Every beginner goes through these challenges, but with continuous practice and mastering basic troubleshooting methods, you will be able to create beautiful works! Although you may encounter some frustrating moments along the way, as long as you keep trying, you will gradually master the skills and solve the problems.

Next, we will explore the various parts of the airbrush and learn how to address common issues to ensure you can complete your creative projects smoothly.

Problem 1: No paint is coming out, or the paint comes out very lightly.

Solution:
- Check if there is enough paint in the Capacity Cup. Refill it if necessary.
- Inspect if the Nozzle is clogged. Clean it using a nozzle cleaning tool.
- Adjust the Air Pressure to ensure proper paint flow.
- Verify the Paint Thinning and adjust accordingly for smoother spraying.
- Clean the Trigger mechanism to ensure it moves freely.

Problem 2: Uneven or spotty paint application.

Solution:
- Clean the Nozzle to remove any blockages.
- Maintain even hand movements while spraying.
- Adjust Air Pressure and Paint Thinning to achieve even application.
- Check the Distance and Angle of the airbrush for uniform spraying.

Problem 3: Air leakage or dripping from the airbrush.

Solution:
- Inspect the Connections and ensure they are tightly fitted.
- Check the Seals for any wear or damage. Replace them if needed.
- Lower the Air Pressure if it is too high to avoid leakage.
- Clean or replace the Nozzle if it is clogged or damaged.

Problem 4: Inconsistent paint spraying.

Solution:
- Ensure the Nozzle is clean and functioning properly.
- Stir the paint thoroughly to ensure Paint Suspension is even.
- Practice a consistent Trigger action for smooth and consistent spraying.

Problem 5: Excessive noise.

Solution:
- Lower the Air Pressure to reduce excessive noise.
- Inspect the Nozzle for any damage or incorrect installation that might cause unusual noise.

Problem 6: Double-action trigger not responding or slow.

Solution:
- Check the Needle Spring for any signs of wear or fatigue.
- Clean the Trigger mechanism and lubricate it if necessary for smoother operation.

Problem 7: Air bubbles or backflow of air into the cup.

Solution:
- Ensure the Nozzle is properly installed and tightened.
- Check the Seals for any damage or wear and replace if necessary.
- Clean the Air Passage to remove any obstructions causing backflow.

Problem 8: Excessive paint splattering.

Solution:
- Adjust the Paint Thinning to ensure proper consistency.
- Reduce Air Pressure if it is too high.
- Inspect the Nozzle for any wear or clogs that may be causing paint splattering.

Problem 9: Needle sticking or not resetting.

Solution:
- Check if the Needle is bent or damaged and replace if necessary.
- Inspect the Needle Spring for any rust or wear and replace it if needed.
- Lubricate the Needle Chucking Guide for smooth needle movement.

Below is a tutorial video on how to disassemble and assemble an airbrush.